[ 0.000000] Linux version 6.1.0-25-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.106-3 (2024-08-26) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000723cdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000723ce000-0x00000000754cdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000754ce000-0x00000000755a2fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000755a3000-0x0000000075662fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000075663000-0x0000000075f65fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000075f66000-0x0000000075ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000075fff000-0x0000000075ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000076000000-0x0000000079ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007aa00000-0x000000007abfffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x00000000803fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fbfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.80 by American Megatrends [ 0.000000] efi: ACPI=0x755a2000 ACPI 2.0=0x755a2014 TPMFinalLog=0x75610000 SMBIOS=0x75d90000 SMBIOS 3.0=0x75d8f000 MEMATTR=0x6d709018 ESRT=0x6da17a18 MOKvar=0x75d63000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.5.0 present. [ 0.000000] DMI: Default string Default string/Default string, BIOS 5.26 06/11/2024 [ 0.000000] tsc: Detected 1700.000 MHz processor [ 0.000000] tsc: Detected 1689.600 MHz TSC [ 0.000215] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000217] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000226] last_pfn = 0x27fc00 max_arch_pfn = 0x400000000 [ 0.000278] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000436] last_pfn = 0x76000 max_arch_pfn = 0x400000000 [ 0.011525] esrt: Reserving ESRT space from 0x000000006da17a18 to 0x000000006da17b68. [ 0.011529] e820: update [mem 0x6da17000-0x6da17fff] usable ==> reserved [ 0.011547] Using GB pages for direct mapping [ 0.011672] RAMDISK: [mem 0x34591000-0x362bffff] [ 0.011675] ACPI: Early table checksum verification disabled [ 0.011678] ACPI: RSDP 0x00000000755A2014 000024 (v02 ALASKA) [ 0.011681] ACPI: XSDT 0x00000000755A1728 00010C (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011686] ACPI: FACP 0x00000000755A0000 000114 (v06 ALASKA A M I 01072009 AMI 01000013) [ 0.011690] ACPI: DSDT 0x0000000075528000 077878 (v02 ALASKA A M I 01072009 INTL 20200717) [ 0.011692] ACPI: FACS 0x0000000075662000 000040 [ 0.011694] ACPI: FIDT 0x0000000075527000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.011696] ACPI: MSDM 0x0000000075526000 000055 (v03 ALASKA A M I 01072009 AMI 01000013) [ 0.011698] ACPI: SSDT 0x0000000075525000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [ 0.011701] ACPI: SSDT 0x000000007551F000 005D0B (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [ 0.011703] ACPI: SSDT 0x000000007551C000 002A45 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [ 0.011705] ACPI: SSDT 0x0000000075518000 0033D3 (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [ 0.011707] ACPI: HPET 0x0000000075517000 000038 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011709] ACPI: APIC 0x0000000075516000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013) [ 0.011711] ACPI: MCFG 0x0000000075515000 00003C (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011712] ACPI: SSDT 0x0000000075513000 001FFD (v02 ALASKA Ther_Rvp 00001000 INTL 20200717) [ 0.011714] ACPI: UEFI 0x00000000755F7000 000048 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011716] ACPI: PSDS 0x0000000075512000 000052 (v01 INTEL EDK2 00000005 INTL 0100000D) [ 0.011718] ACPI: NHLT 0x0000000075511000 00002D (v00 ALASKA A M I 01072009 AMI 01000013) [ 0.011720] ACPI: LPIT 0x0000000075510000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011722] ACPI: SSDT 0x000000007550C000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717) [ 0.011724] ACPI: SSDT 0x0000000075509000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717) [ 0.011726] ACPI: DBGP 0x0000000075508000 000034 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011728] ACPI: DBG2 0x0000000075507000 000054 (v00 ALASKA A M I 01072009 AMI 01000013) [ 0.011730] ACPI: DMAR 0x0000000075506000 000088 (v02 INTEL EDK2 00000002 01000013) [ 0.011732] ACPI: FPDT 0x0000000075505000 000044 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011734] ACPI: SSDT 0x0000000075504000 00073A (v02 INTEL xh_adl_N 00000000 INTL 20200717) [ 0.011736] ACPI: SSDT 0x0000000075500000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717) [ 0.011738] ACPI: SSDT 0x00000000754FC000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [ 0.011740] ACPI: SSDT 0x00000000754FB000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717) [ 0.011742] ACPI: BGRT 0x00000000754FA000 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.011744] ACPI: TPM2 0x00000000754F9000 00004C (v04 ALASKA A M I 00000001 AMI 00000000) [ 0.011746] ACPI: PHAT 0x00000000754F8000 000671 (v01 ALASKA A M I 00000005 MSFT 0100000D) [ 0.011747] ACPI: WSMT 0x000000007550F000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.011749] ACPI: Reserving FACP table memory at [mem 0x755a0000-0x755a0113] [ 0.011750] ACPI: Reserving DSDT table memory at [mem 0x75528000-0x7559f877] [ 0.011751] ACPI: Reserving FACS table memory at [mem 0x75662000-0x7566203f] [ 0.011752] ACPI: Reserving FIDT table memory at [mem 0x75527000-0x7552709b] [ 0.011752] ACPI: Reserving MSDM table memory at [mem 0x75526000-0x75526054] [ 0.011753] ACPI: Reserving SSDT table memory at [mem 0x75525000-0x7552538b] [ 0.011754] ACPI: Reserving SSDT table memory at [mem 0x7551f000-0x75524d0a] [ 0.011754] ACPI: Reserving SSDT table memory at [mem 0x7551c000-0x7551ea44] [ 0.011755] ACPI: Reserving SSDT table memory at [mem 0x75518000-0x7551b3d2] [ 0.011755] ACPI: Reserving HPET table memory at [mem 0x75517000-0x75517037] [ 0.011756] ACPI: Reserving APIC table memory at [mem 0x75516000-0x755161db] [ 0.011757] ACPI: Reserving MCFG table memory at [mem 0x75515000-0x7551503b] [ 0.011757] ACPI: Reserving SSDT table memory at [mem 0x75513000-0x75514ffc] [ 0.011758] ACPI: Reserving UEFI table memory at [mem 0x755f7000-0x755f7047] [ 0.011758] ACPI: Reserving PSDS table memory at [mem 0x75512000-0x75512051] [ 0.011759] ACPI: Reserving NHLT table memory at [mem 0x75511000-0x7551102c] [ 0.011760] ACPI: Reserving LPIT table memory at [mem 0x75510000-0x755100cb] [ 0.011760] ACPI: Reserving SSDT table memory at [mem 0x7550c000-0x7550ea82] [ 0.011761] ACPI: Reserving SSDT table memory at [mem 0x75509000-0x7550b356] [ 0.011761] ACPI: Reserving DBGP table memory at [mem 0x75508000-0x75508033] [ 0.011762] ACPI: Reserving DBG2 table memory at [mem 0x75507000-0x75507053] [ 0.011763] ACPI: Reserving DMAR table memory at [mem 0x75506000-0x75506087] [ 0.011763] ACPI: Reserving FPDT table memory at [mem 0x75505000-0x75505043] [ 0.011764] ACPI: Reserving SSDT table memory at [mem 0x75504000-0x75504739] [ 0.011765] ACPI: Reserving SSDT table memory at [mem 0x75500000-0x75503ae9] [ 0.011765] ACPI: Reserving SSDT table memory at [mem 0x754fc000-0x754ff9d9] [ 0.011766] ACPI: Reserving SSDT table memory at [mem 0x754fb000-0x754fb143] [ 0.011766] ACPI: Reserving BGRT table memory at [mem 0x754fa000-0x754fa037] [ 0.011767] ACPI: Reserving TPM2 table memory at [mem 0x754f9000-0x754f904b] [ 0.011768] ACPI: Reserving PHAT table memory at [mem 0x754f8000-0x754f8670] [ 0.011768] ACPI: Reserving WSMT table memory at [mem 0x7550f000-0x7550f027] [ 0.011903] No NUMA configuration found [ 0.011904] Faking a node at [mem 0x0000000000000000-0x000000027fbfffff] [ 0.011911] NODE_DATA(0) allocated [mem 0x27fbd5000-0x27fbfffff] [ 0.012087] Zone ranges: [ 0.012087] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.012089] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.012090] Normal [mem 0x0000000100000000-0x000000027fbfffff] [ 0.012091] Device empty [ 0.012092] Movable zone start for each node [ 0.012094] Early memory node ranges [ 0.012094] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.012095] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.012096] node 0: [mem 0x0000000000100000-0x00000000723cdfff] [ 0.012097] node 0: [mem 0x0000000075fff000-0x0000000075ffffff] [ 0.012097] node 0: [mem 0x0000000100000000-0x000000027fbfffff] [ 0.012099] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fbfffff] [ 0.012104] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012105] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012147] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.016107] On node 0, zone DMA32: 15409 pages in unavailable ranges [ 0.016452] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.016462] On node 0, zone Normal: 1024 pages in unavailable ranges [ 0.016483] Reserving Intel graphics memory at [mem 0x7c800000-0x803fffff] [ 0.016723] ACPI: PM-Timer IO Port: 0x1808 [ 0.016730] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.016731] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.016732] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.016733] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.016733] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.016734] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.016734] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.016735] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.016735] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.016736] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.016736] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.016737] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.016737] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.016738] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.016738] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.016739] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.016740] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.016740] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.016741] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.016741] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.016742] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.016742] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.016743] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.016744] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.016780] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.016782] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.016784] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.016787] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.016788] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.016796] e820: update [mem 0x6bac9000-0x6bb1bfff] usable ==> reserved [ 0.016807] TSC deadline timer available [ 0.016808] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.016826] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.016828] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.016829] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.016830] PM: hibernation: Registered nosave memory: [mem 0x6bac9000-0x6bb1bfff] [ 0.016832] PM: hibernation: Registered nosave memory: [mem 0x6da17000-0x6da17fff] [ 0.016833] PM: hibernation: Registered nosave memory: [mem 0x723ce000-0x754cdfff] [ 0.016833] PM: hibernation: Registered nosave memory: [mem 0x754ce000-0x755a2fff] [ 0.016834] PM: hibernation: Registered nosave memory: [mem 0x755a3000-0x75662fff] [ 0.016834] PM: hibernation: Registered nosave memory: [mem 0x75663000-0x75f65fff] [ 0.016835] PM: hibernation: Registered nosave memory: [mem 0x75f66000-0x75ffefff] [ 0.016836] PM: hibernation: Registered nosave memory: [mem 0x76000000-0x79ffffff] [ 0.016837] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7a9fffff] [ 0.016837] PM: hibernation: Registered nosave memory: [mem 0x7aa00000-0x7abfffff] [ 0.016838] PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7affffff] [ 0.016838] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x803fffff] [ 0.016839] PM: hibernation: Registered nosave memory: [mem 0x80400000-0xbfffffff] [ 0.016839] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff] [ 0.016840] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfdffffff] [ 0.016840] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.016841] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.016841] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.016842] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.016842] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.016843] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff] [ 0.016843] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.016844] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff] [ 0.016844] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.016845] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.016845] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.016847] [mem 0x80400000-0xbfffffff] available for PCI devices [ 0.016848] Booting paravirtualized kernel on bare hardware [ 0.016850] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.020552] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.020922] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.020929] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.020932] pcpu-alloc: [0] 0 1 2 3 [ 0.020957] Fallback order for Node 0: 0 [ 0.020960] Built 1 zonelists, mobility grouping on. Total pages: 2007631 [ 0.020961] Policy zone: Normal [ 0.020962] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=31e72d7e-ef07-47cd-ad32-4e045a01bd88 ro [ 0.020987] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64", will be passed to user space. [ 0.020998] random: crng init done [ 0.021913] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.022432] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.022467] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.022476] software IO TLB: area num 4. [ 0.046553] Memory: 1802704K/8158644K available (14342K kernel code, 2335K rwdata, 9072K rodata, 2796K init, 17396K bss, 396012K reserved, 0K cma-reserved) [ 0.046648] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.046675] ftrace: allocating 40246 entries in 158 pages [ 0.049046] ftrace: allocated 158 pages with 5 groups [ 0.049424] Dynamic Preempt: voluntary [ 0.049447] rcu: Preemptible hierarchical RCU implementation. [ 0.049447] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.049448] Trampoline variant of Tasks RCU enabled. [ 0.049449] Rude variant of Tasks RCU enabled. [ 0.049449] Tracing variant of Tasks RCU enabled. [ 0.049450] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.049450] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.052941] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.053218] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.053422] Console: colour dummy device 80x25 [ 0.053659] printk: console [tty0] enabled [ 0.053672] ACPI: Core revision 20220331 [ 0.053992] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.053995] APIC: Switch to symmetric I/O mode setup [ 0.053997] DMAR: Host address width 39 [ 0.053999] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.054005] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.054008] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.054013] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da [ 0.054016] DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff [ 0.054019] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.054021] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.054023] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.055738] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.055742] x2apic enabled [ 0.055773] Switched APIC routing to cluster x2apic. [ 0.060396] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x185ac6cdb26, max_idle_ns: 440795262339 ns [ 0.060405] Calibrating delay loop (skipped), value calculated using timer frequency.. 3379.20 BogoMIPS (lpj=6758400) [ 0.060434] CPU0: Thermal monitoring enabled (TM1) [ 0.060436] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.060505] process: using mwait in idle threads [ 0.060508] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.060510] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.060513] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.060516] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.060518] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.060521] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.060523] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.060525] Register File Data Sampling: Vulnerable: No microcode [ 0.060533] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.060535] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.060537] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.060538] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.060541] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.060543] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 0.060545] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. [ 0.064401] Freeing SMP alternatives memory: 36K [ 0.064401] pid_max: default: 32768 minimum: 301 [ 0.064401] LSM: Security Framework initializing [ 0.064401] landlock: Up and running. [ 0.064401] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.064401] AppArmor: AppArmor initialized [ 0.064401] TOMOYO Linux initialized [ 0.064401] LSM support for eBPF active [ 0.064401] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.064401] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.064401] smpboot: CPU0: Intel(R) N95 (family: 0x6, model: 0xbe, stepping: 0x0) [ 0.064401] cblist_init_generic: Setting adjustable number of callback queues. [ 0.064401] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.064401] cblist_init_generic: Setting adjustable number of callback queues. [ 0.064401] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.064401] cblist_init_generic: Setting adjustable number of callback queues. [ 0.064401] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.064401] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, PEBS-via-PT, AnyThread deprecated, Gracemont events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.064401] ... version: 5 [ 0.064401] ... bit width: 48 [ 0.064401] ... generic registers: 6 [ 0.064401] ... value mask: 0000ffffffffffff [ 0.064401] ... max period: 00007fffffffffff [ 0.064401] ... fixed-purpose events: 3 [ 0.064401] ... event mask: 000000070000003f [ 0.064401] signal: max sigframe size: 3632 [ 0.064401] Estimated ratio of average max frequency by base frequency (times 1024): 1626 [ 0.064401] rcu: Hierarchical SRCU implementation. [ 0.064401] rcu: Max phase no-delay instances is 1000. [ 0.064401] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.064401] smp: Bringing up secondary CPUs ... [ 0.064401] x86: Booting SMP configuration: [ 0.064401] .... node #0, CPUs: #1 #2 #3 [ 0.064401] smp: Brought up 1 node, 4 CPUs [ 0.064401] smpboot: Max logical packages: 1 [ 0.064401] smpboot: Total of 4 processors activated (13516.80 BogoMIPS) [ 0.075636] node 0 deferred pages initialised in 12ms [ 0.075639] devtmpfs: initialized [ 0.075639] x86/mm: Memory block size: 128MB [ 0.076582] ACPI: PM: Registering ACPI NVS region [mem 0x755a3000-0x75662fff] (786432 bytes) [ 0.076582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.076582] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.076582] pinctrl core: initialized pinctrl subsystem [ 0.077180] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.077383] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.077516] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.077649] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.077662] audit: initializing netlink subsys (disabled) [ 0.077673] audit: type=2000 audit(1730653639.016:1): state=initialized audit_enabled=0 res=1 [ 0.077673] thermal_sys: Registered thermal governor 'fair_share' [ 0.077673] thermal_sys: Registered thermal governor 'bang_bang' [ 0.077673] thermal_sys: Registered thermal governor 'step_wise' [ 0.077673] thermal_sys: Registered thermal governor 'user_space' [ 0.077673] thermal_sys: Registered thermal governor 'power_allocator' [ 0.077673] cpuidle: using governor ladder [ 0.077673] cpuidle: using governor menu [ 0.077673] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.077673] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.077673] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.077673] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 0.077673] PCI: Using configuration type 1 for base access [ 0.077673] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.077673] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.080430] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.080430] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.080430] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.080430] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.083150] ACPI: Added _OSI(Module Device) [ 0.083150] ACPI: Added _OSI(Processor Device) [ 0.083150] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.083150] ACPI: Added _OSI(Processor Aggregator Device) [ 0.159348] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20220331/dswload2-162) [ 0.159358] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) [ 0.159362] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.159367] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162) [ 0.159371] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) [ 0.159374] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010) [ 0.161514] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.173690] ACPI: Dynamic OEM Table Load: [ 0.173703] ACPI: SSDT 0xFFFF90F800EEE200 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [ 0.174419] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.176053] ACPI: Dynamic OEM Table Load: [ 0.176061] ACPI: SSDT 0xFFFF90F800E71800 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [ 0.176943] ACPI: Dynamic OEM Table Load: [ 0.176950] ACPI: SSDT 0xFFFF90F800E72400 0003B3 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [ 0.177878] ACPI: Dynamic OEM Table Load: [ 0.177885] ACPI: SSDT 0xFFFF90F800F3F800 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717) [ 0.179074] ACPI: Dynamic OEM Table Load: [ 0.179085] ACPI: SSDT 0xFFFF90F800C70000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [ 0.180503] ACPI: Dynamic OEM Table Load: [ 0.180511] ACPI: SSDT 0xFFFF90F800C76000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717) [ 0.181768] ACPI: Dynamic OEM Table Load: [ 0.181776] ACPI: SSDT 0xFFFF90F800C74000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [ 0.183076] ACPI: Dynamic OEM Table Load: [ 0.183084] ACPI: SSDT 0xFFFF90F800CD5000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [ 0.186082] ACPI: Interpreter enabled [ 0.186138] ACPI: PM: (supports S0 S3 S4 S5) [ 0.186140] ACPI: Using IOAPIC for interrupt routing [ 0.186187] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.186190] PCI: Ignoring E820 reservations for host bridge windows [ 0.187326] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.199730] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.199739] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.199765] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.199770] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.206869] ACPI: PM: Power Resource [WRST] [ 0.219279] ACPI: PM: Power Resource [FN00] [ 0.219337] ACPI: PM: Power Resource [FN01] [ 0.219389] ACPI: PM: Power Resource [FN02] [ 0.219441] ACPI: PM: Power Resource [FN03] [ 0.219493] ACPI: PM: Power Resource [FN04] [ 0.219961] ACPI: PM: Power Resource [PIN] [ 0.220213] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.220222] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.220363] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.220631] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.220634] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.221952] PCI host bridge to bus 0000:00 [ 0.221955] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.221958] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.221961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.221964] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.221967] pci_bus 0000:00: root bus resource [mem 0x80400000-0xbfffffff window] [ 0.221970] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.221972] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.222009] pci 0000:00:00.0: [8086:4618] type 00 class 0x060000 [ 0.222145] pci 0000:00:02.0: [8086:46d2] type 00 class 0x030000 [ 0.222155] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit] [ 0.222162] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.222168] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.222185] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.222187] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.222190] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.222220] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] [ 0.222222] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.222229] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] [ 0.222232] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.222435] pci 0000:00:14.0: [8086:54ed] type 00 class 0x0c0330 [ 0.222459] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit] [ 0.222549] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.224228] pci 0000:00:14.2: [8086:54ef] type 00 class 0x050000 [ 0.224251] pci 0000:00:14.2: reg 0x10: [mem 0x6001114000-0x6001117fff 64bit] [ 0.224266] pci 0000:00:14.2: reg 0x18: [mem 0x600111b000-0x600111bfff 64bit] [ 0.224399] pci 0000:00:16.0: [8086:54e0] type 00 class 0x078000 [ 0.224429] pci 0000:00:16.0: reg 0x10: [mem 0x600111a000-0x600111afff 64bit] [ 0.224536] pci 0000:00:16.0: PME# supported from D3hot [ 0.224994] pci 0000:00:17.0: [8086:54d3] type 00 class 0x010601 [ 0.225013] pci 0000:00:17.0: reg 0x10: [mem 0x80600000-0x80601fff] [ 0.225024] pci 0000:00:17.0: reg 0x14: [mem 0x80603000-0x806030ff] [ 0.225034] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097] [ 0.225045] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083] [ 0.225055] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] [ 0.225065] pci 0000:00:17.0: reg 0x24: [mem 0x80602000-0x806027ff] [ 0.225116] pci 0000:00:17.0: PME# supported from D3hot [ 0.225435] pci 0000:00:1a.0: [8086:54c4] type 00 class 0x080501 [ 0.225463] pci 0000:00:1a.0: reg 0x10: [mem 0x6001119000-0x6001119fff 64bit] [ 0.225776] pci 0000:00:1c.0: [8086:54be] type 01 class 0x060400 [ 0.225879] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.225915] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.226377] pci 0000:00:1d.0: [8086:54b0] type 01 class 0x060400 [ 0.226479] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.226515] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.226982] pci 0000:00:1f.0: [8086:5482] type 00 class 0x060100 [ 0.227421] pci 0000:00:1f.3: [8086:54c8] type 00 class 0x040300 [ 0.227465] pci 0000:00:1f.3: reg 0x10: [mem 0x6001110000-0x6001113fff 64bit] [ 0.227519] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit] [ 0.227625] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.227718] pci 0000:00:1f.4: [8086:54a3] type 00 class 0x0c0500 [ 0.227743] pci 0000:00:1f.4: reg 0x10: [mem 0x6001118000-0x60011180ff 64bit] [ 0.227768] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.227977] pci 0000:00:1f.5: [8086:54a4] type 00 class 0x0c8000 [ 0.227998] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.228176] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.228200] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.228232] pci 0000:01:00.0: reg 0x18: [mem 0x80504000-0x80504fff 64bit] [ 0.228253] pci 0000:01:00.0: reg 0x20: [mem 0x80500000-0x80503fff 64bit] [ 0.228376] pci 0000:01:00.0: supports D1 D2 [ 0.228378] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.228586] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.228591] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.228595] pci 0000:00:1c.0: bridge window [mem 0x80500000-0x805fffff] [ 0.228669] pci 0000:02:00.0: [10ec:c821] type 00 class 0x028000 [ 0.228693] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.228723] pci 0000:02:00.0: reg 0x18: [mem 0x80400000-0x8040ffff 64bit] [ 0.228874] pci 0000:02:00.0: supports D1 D2 [ 0.228876] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229128] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.229133] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.229137] pci 0000:00:1d.0: bridge window [mem 0x80400000-0x804fffff] [ 0.231896] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.231997] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.232095] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.232193] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.232291] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.232389] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.232489] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.232587] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.244468] iommu: Default domain type: Translated [ 0.244468] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.244475] pps_core: LinuxPPS API ver. 1 registered [ 0.244478] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.244482] PTP clock support registered [ 0.244489] EDAC MC: Ver: 3.0.0 [ 0.244580] Registered efivars operations [ 0.244580] NetLabel: Initializing [ 0.244582] NetLabel: domain hash size = 128 [ 0.244583] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.244600] NetLabel: unlabeled traffic allowed by default [ 0.244603] PCI: Using ACPI for IRQ routing [ 0.267739] PCI: pci_cache_line_size set to 64 bytes [ 0.267787] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.267830] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.267832] e820: reserve RAM buffer [mem 0x6bac9000-0x6bffffff] [ 0.267833] e820: reserve RAM buffer [mem 0x6da17000-0x6fffffff] [ 0.267834] e820: reserve RAM buffer [mem 0x723ce000-0x73ffffff] [ 0.267835] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff] [ 0.267835] e820: reserve RAM buffer [mem 0x27fc00000-0x27fffffff] [ 0.268471] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.268471] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.268471] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.268471] vgaarb: loaded [ 0.268473] clocksource: Switched to clocksource tsc-early [ 0.268563] VFS: Disk quotas dquot_6.6.0 [ 0.268574] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.268680] AppArmor: AppArmor Filesystem Enabled [ 0.268695] pnp: PnP ACPI init [ 0.268888] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.268888] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.269002] system 00:01: [io 0x1854-0x1857] has been reserved [ 0.271390] pnp 00:02: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.271425] system 00:02: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.271428] system 00:02: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.271431] system 00:02: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.271434] system 00:02: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.271436] system 00:02: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.271439] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.271441] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.272318] system 00:03: [io 0x2000-0x20fe] has been reserved [ 0.273174] pnp: PnP ACPI: found 5 devices [ 0.278755] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.278819] NET: Registered PF_INET protocol family [ 0.278966] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.280614] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.280653] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.280730] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.281080] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.281193] TCP: Hash tables configured (established 65536 bind 65536) [ 0.281277] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.281310] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.281338] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.281377] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.281384] NET: Registered PF_XDP protocol family [ 0.281407] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.281419] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] [ 0.281425] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit] [ 0.281430] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80604000-0x80604fff] [ 0.281446] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.281449] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.281454] pci 0000:00:1c.0: bridge window [mem 0x80500000-0x805fffff] [ 0.281462] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.281465] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.281470] pci 0000:00:1d.0: bridge window [mem 0x80400000-0x804fffff] [ 0.281478] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.281481] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.281483] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.281485] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window] [ 0.281488] pci_bus 0000:00: resource 8 [mem 0x80400000-0xbfffffff window] [ 0.281490] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window] [ 0.281493] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.281495] pci_bus 0000:01: resource 1 [mem 0x80500000-0x805fffff] [ 0.281497] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.281499] pci_bus 0000:02: resource 1 [mem 0x80400000-0x804fffff] [ 0.281971] PCI: CLS 64 bytes, default 64 [ 0.282008] DMAR: No ATSR found [ 0.282010] DMAR: No SATC found [ 0.282012] DMAR: IOMMU feature fl1gp_support inconsistent [ 0.282013] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.282015] DMAR: IOMMU feature nwfs inconsistent [ 0.282016] DMAR: IOMMU feature dit inconsistent [ 0.282018] DMAR: IOMMU feature sc_support inconsistent [ 0.282020] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 0.282022] DMAR: dmar0: Using Queued invalidation [ 0.282026] DMAR: dmar1: Using Queued invalidation [ 0.282056] Trying to unpack rootfs image as initramfs... [ 0.282268] pci 0000:00:02.0: Adding to iommu group 0 [ 0.282309] pci 0000:00:00.0: Adding to iommu group 1 [ 0.282323] pci 0000:00:14.0: Adding to iommu group 2 [ 0.282332] pci 0000:00:14.2: Adding to iommu group 2 [ 0.282342] pci 0000:00:16.0: Adding to iommu group 3 [ 0.282349] pci 0000:00:17.0: Adding to iommu group 4 [ 0.282358] pci 0000:00:1a.0: Adding to iommu group 5 [ 0.282372] pci 0000:00:1c.0: Adding to iommu group 6 [ 0.282385] pci 0000:00:1d.0: Adding to iommu group 7 [ 0.282398] pci 0000:00:1f.0: Adding to iommu group 8 [ 0.282406] pci 0000:00:1f.3: Adding to iommu group 8 [ 0.282413] pci 0000:00:1f.4: Adding to iommu group 8 [ 0.282420] pci 0000:00:1f.5: Adding to iommu group 8 [ 0.282435] pci 0000:01:00.0: Adding to iommu group 9 [ 0.282444] pci 0000:02:00.0: Adding to iommu group 10 [ 0.283169] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.283172] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.283175] software IO TLB: mapped [mem 0x0000000067ac9000-0x000000006bac9000] (64MB) [ 0.283203] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x185ac6cdb26, max_idle_ns: 440795262339 ns [ 0.283220] clocksource: Switched to clocksource tsc [ 0.283246] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.283569] Initialise system trusted keyrings [ 0.283580] Key type blacklist registered [ 0.283623] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.284665] zbud: loaded [ 0.284845] integrity: Platform Keyring initialized [ 0.284852] integrity: Machine keyring initialized [ 0.284854] Key type asymmetric registered [ 0.284855] Asymmetric key parser 'x509' registered [ 0.515975] Freeing initrd memory: 29884K [ 0.520083] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.520114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.520141] io scheduler mq-deadline registered [ 0.521183] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 0.521443] pcieport 0000:00:1d.0: AER: enabled with IRQ 123 [ 0.521533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.522618] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.ITE8.GETT], AE_NOT_FOUND (20220331/psargs-330) [ 0.522627] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.522699] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.ITE8.GETT], AE_NOT_FOUND (20220331/psargs-330) [ 0.522704] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.522851] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.523274] hpet_acpi_add: no address or irqs in _CRS [ 0.523296] Linux agpgart interface v0.103 [ 0.530147] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.530447] i8042: PNP: No PS/2 controller found. [ 0.530490] mousedev: PS/2 mouse device common for all mice [ 0.530515] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.531387] rtc_cmos rtc_cmos: registered as rtc0 [ 0.531564] rtc_cmos rtc_cmos: setting system clock to 2024-11-03T17:07:19 UTC (1730653639) [ 0.531591] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 0.531713] intel_pstate: Intel P-state driver initializing [ 0.531944] intel_pstate: HWP enabled [ 0.531965] ledtrig-cpu: registered to indicate activity on CPUs [ 0.532236] efifb: probing for efifb [ 0.532247] efifb: framebuffer at 0x4000000000, using 1920k, total 1920k [ 0.532250] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 0.532252] efifb: scrolling: redraw [ 0.532254] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.532689] Console: switching to colour frame buffer device 100x37 [ 0.533062] fb0: EFI VGA frame buffer device [ 0.542659] NET: Registered PF_INET6 protocol family [ 0.546035] Segment Routing with IPv6 [ 0.546054] In-situ OAM (IOAM) with IPv6 [ 0.546080] mip6: Mobile IPv6 [ 0.546088] NET: Registered PF_PACKET protocol family [ 0.546118] mpls_gso: MPLS GSO support [ 0.546376] microcode: sig=0xb06e0, pf=0x1, revision=0xf [ 0.546397] microcode: Microcode Update Driver: v2.2. [ 0.546427] resctrl: L2 allocation detected [ 0.546445] IPI shorthand broadcast: enabled [ 0.546472] sched_clock: Marking stable (539409350, 7008543)->(560738518, -14320625) [ 0.546898] registered taskstats version 1 [ 0.547202] Loading compiled-in X.509 certificates [ 0.567585] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.567940] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 0.569106] zswap: loaded using pool lzo/zbud [ 0.569707] Key type .fscrypt registered [ 0.570032] Key type fscrypt-provisioning registered [ 0.574440] Key type encrypted registered [ 0.574751] AppArmor: AppArmor sha1 policy hashing enabled [ 0.576146] ima: Allocated hash algorithm: sha256 [ 0.593622] ima: No architecture policies found [ 0.594376] evm: Initialising EVM extended attributes: [ 0.595116] evm: security.selinux [ 0.595786] evm: security.SMACK64 (disabled) [ 0.596387] evm: security.SMACK64EXEC (disabled) [ 0.596926] evm: security.SMACK64TRANSMUTE (disabled) [ 0.597438] evm: security.SMACK64MMAP (disabled) [ 0.597910] evm: security.apparmor [ 0.598364] evm: security.ima [ 0.598788] evm: security.capability [ 0.599188] evm: HMAC attrs: 0x1 [ 0.683443] clk: Disabling unused clocks [ 0.684622] Freeing unused decrypted memory: 2036K [ 0.685306] Freeing unused kernel image (initmem) memory: 2796K [ 0.685521] Write protecting the kernel read-only data: 26624k [ 0.686304] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 0.686761] Freeing unused kernel image (rodata/data gap) memory: 1168K [ 0.718192] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.718473] Run /init as init process [ 0.718692] with arguments: [ 0.718694] /init [ 0.718694] with environment: [ 0.718695] HOME=/ [ 0.718695] TERM=linux [ 0.718696] BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 [ 0.725821] udevd[121]: starting version 3.2.12 [ 0.726870] udevd[122]: starting eudev-3.2.12 [ 0.757481] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 0.757939] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.758288] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.762035] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 0.762814] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 0.769411] ACPI: bus type USB registered [ 0.769528] sdhci: Secure Digital Host Controller Interface driver [ 0.769672] usbcore: registered new interface driver usbfs [ 0.769895] sdhci: Copyright(c) Pierre Ossman [ 0.770134] usbcore: registered new interface driver hub [ 0.770595] usbcore: registered new device driver usb [ 0.774993] SCSI subsystem initialized [ 0.776881] sdhci-pci 0000:00:1a.0: SDHCI controller found [8086:54c4] (rev 0) [ 0.777905] mmc0: CQHCI version 5.10 [ 0.780810] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.784674] mmc0: SDHCI controller on PCI [0000:00:1a.0] using ADMA 64-bit [ 0.789814] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.790080] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.791505] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810 [ 0.792301] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.792582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.792866] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.793182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.793508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.793768] usb usb1: Product: xHCI Host Controller [ 0.794026] usb usb1: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd [ 0.794285] usb usb1: SerialNumber: 0000:00:14.0 [ 0.794654] hub 1-0:1.0: USB hub found [ 0.794931] hub 1-0:1.0: 12 ports detected [ 0.795639] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.796187] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.796780] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.797356] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.797628] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 68:1d:ef:49:57:01, XID 541, IRQ 125 [ 0.797983] ACPI BIOS Error (bug): [ 0.798276] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 0.798277] Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.799233] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.799894] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20220331/psargs-330) [ 0.800558] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 0.802120] libata version 3.00 loaded. [ 0.802564] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.802926] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.803287] usb usb2: Product: xHCI Host Controller [ 0.803633] usb usb2: Manufacturer: Linux 6.1.0-25-amd64 xhci-hcd [ 0.803977] usb usb2: SerialNumber: 0000:00:14.0 [ 0.804504] hub 2-0:1.0: USB hub found [ 0.804856] hub 2-0:1.0: 4 ports detected [ 0.807662] ahci 0000:00:17.0: version 3.0 [ 0.807897] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.808246] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 0.808860] scsi host0: ahci [ 0.809315] scsi host1: ahci [ 0.809689] ata1: SATA max UDMA/133 abar m2048@0x80602000 port 0x80602100 irq 126 [ 0.810077] ata2: SATA max UDMA/133 abar m2048@0x80602000 port 0x80602180 irq 126 [ 1.059197] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.123227] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.124470] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.127074] ata2.00: ATA-9: RS256GSSD310, W1212A0, max UDMA/133 [ 1.128836] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.132412] ata2.00: Features: Dev-Sleep [ 1.139181] ata2.00: configured for UDMA/133 [ 1.153875] ata1.00: ATA-10: ST500LM030-1RK17D, SDM1, max UDMA/133 [ 1.209855] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98 [ 1.210994] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.212097] usb 1-3: Product: USB2.0 Hub [ 1.215244] hub 1-3:1.0: USB hub found [ 1.216575] hub 1-3:1.0: 4 ports detected [ 1.250425] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.301581] ata1.00: configured for UDMA/133 [ 1.303105] scsi 0:0:0:0: Direct-Access ATA ST500LM030-1RK17 SDM1 PQ: 0 ANSI: 5 [ 1.305999] scsi 1:0:0:0: Direct-Access ATA RS256GSSD310 2A0 PQ: 0 ANSI: 5 [ 1.329379] sd 0:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.329382] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.329397] sd 1:0:0:0: [sda] Write Protect is off [ 1.329954] sd 0:0:0:0: [sdb] 4096-byte physical blocks [ 1.330502] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.331042] sd 0:0:0:0: [sdb] Write Protect is off [ 1.331578] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.332027] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.333017] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.333021] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.333958] sd 0:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.335889] sda: sda1 sda2 sda3 [ 1.336435] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.347216] usb 1-5: new full-speed USB device number 3 using xhci_hcd [ 1.349020] sdb: sdb1 [ 1.350060] sd 0:0:0:0: [sdb] Attached SCSI disk [ 1.354644] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.355298] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.496342] usb 1-5: New USB device found, idVendor=0bda, idProduct=c821, bcdDevice= 1.10 [ 1.497303] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.498224] usb 1-5: Product: Bluetooth Radio [ 1.499094] usb 1-5: Manufacturer: Realtek [ 1.499903] usb 1-5: SerialNumber: 00e04c000001 [ 1.575106] usb 1-3.2: new full-speed USB device number 4 using xhci_hcd [ 1.598462] PM: Image not found (code -22) [ 1.676378] usb 1-3.2: New USB device found, idVendor=195d, idProduct=2036, bcdDevice= 0.00 [ 1.676672] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.677006] usb 1-3.2: Product: LPC11Uxx USB HID [ 1.677277] usb 1-3.2: Manufacturer: NXP SEMICOND [ 1.700494] hid: raw HID events driver (C) Jiri Kosina [ 1.705530] usbcore: registered new interface driver usbhid [ 1.705843] usbhid: USB HID core driver [ 1.706802] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.707315] input: NXP SEMICOND LPC11Uxx USB HID as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:195D:2036.0001/input/input0 [ 1.803287] usb 1-6: new full-speed USB device number 5 using xhci_hcd [ 1.815477] hid-generic 0003:195D:2036.0001: input,hidraw0: USB HID v1.00 Keyboard [NXP SEMICOND LPC11Uxx USB HID] on usb-0000:00:14.0-3.2/input0 [ 1.818080] input: NXP SEMICOND LPC11Uxx USB HID as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:195D:2036.0002/input/input1 [ 1.927484] hid-generic 0003:195D:2036.0002: input,hidraw1: USB HID v1.00 Keyboard [NXP SEMICOND LPC11Uxx USB HID] on usb-0000:00:14.0-3.2/input1 [ 1.930327] input: NXP SEMICOND LPC11Uxx USB HID Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.2/0003:195D:2036.0003/input/input2 [ 1.954091] usb 1-6: New USB device found, idVendor=0573, idProduct=1573, bcdDevice=80.07 [ 1.955238] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.956322] usb 1-6: Product: USB Audio and HID [ 1.957378] usb 1-6: Manufacturer: CSCTEK [ 1.958439] usb 1-6: SerialNumber: A34004801402 [ 1.961203] usbhid 1-6:1.3: couldn't find an input interrupt endpoint [ 1.991312] input: NXP SEMICOND LPC11Uxx USB HID System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.2/0003:195D:2036.0003/input/input3 [ 1.993721] hid-generic 0003:195D:2036.0003: input,hidraw2: USB HID v1.00 Device [NXP SEMICOND LPC11Uxx USB HID] on usb-0000:00:14.0-3.2/input2 [ 1.996494] input: NXP SEMICOND LPC11Uxx USB HID as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.3/0003:195D:2036.0004/input/input4 [ 2.031201] usb 1-3.3: new low-speed USB device number 6 using xhci_hcd [ 2.103487] hid-generic 0003:195D:2036.0004: input,hidraw3: USB HID v1.00 Keyboard [NXP SEMICOND LPC11Uxx USB HID] on usb-0000:00:14.0-3.2/input3 [ 2.136698] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 2.139185] usb 1-3.3: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00 [ 2.139539] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.139882] usb 1-3.3: Product: USB Optical Mouse [ 2.140219] usb 1-3.3: Manufacturer: PixArt [ 2.145303] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:093A:2510.0005/input/input5 [ 2.146053] hid-generic 0003:093A:2510.0005: input,hidraw4: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3.3/input0 [ 2.352685] udevd[406]: starting version 3.2.12 [ 2.367006] udevd[407]: starting eudev-3.2.12 [ 2.401051] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 [ 2.402369] ACPI: button: Sleep Button [SLPB] [ 2.407548] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 [ 2.408199] ACPI: button: Power Button [PWRB] [ 2.410163] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 2.412714] ACPI: button: Power Button [PWRF] [ 2.449150] intel_pmc_core INT33A1:00: initialized [ 2.480452] udevd[432]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:14.0/usb1/1-6 1 5': No such file or directory [ 2.482557] udevd[433]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2 1 4': No such file or directory [ 2.483620] udevd[434]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3 1 6': No such file or directory [ 2.503447] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 2.513803] iTCO_vendor_support: vendor-support=0 [ 2.518141] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 2.543600] ACPI: bus type drm_connector registered [ 2.555537] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 2.584492] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.585043] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 2.585952] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 2.589763] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.590286] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.591555] platform regulatory.0: firmware: failed to load regulatory.db (-2) [ 2.591899] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 2.592572] platform regulatory.0: firmware: failed to load regulatory.db (-2) [ 2.592921] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.593273] cfg80211: failed to load regulatory.db [ 2.603867] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 2.604732] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.604949] mc: Linux media interface: v0.10 [ 2.699992] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 2.700986] pstore: Using crash dump compression: deflate [ 2.703572] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 2.719048] usb 1-6: Warning! Unlikely big volume range (=511), cval->res is probably wrong. [ 2.719552] usb 1-6: [5] FU [Mic Capture Volume] ch = 1, val = -8192/-1/16 [ 2.722760] usb 1-6: Warning! Unlikely big volume range (=896), cval->res is probably wrong. [ 2.723217] usb 1-6: [6] FU [PCM Playback Volume] ch = 2, val = -16384/-2048/16 [ 2.724001] usbcore: registered new interface driver snd-usb-audio [ 2.725155] pstore: Registered efi as persistent store backend [ 2.779522] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 2.780513] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.780946] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.792209] cryptd: max_cpu_qlen set to 1000 [ 2.849978] AVX2 version of gcm_enc/dec engaged. [ 2.850447] AES CTR mode by8 optimization enabled [ 2.850919] Bluetooth: Core ver 2.22 [ 2.851352] NET: Registered PF_BLUETOOTH protocol family [ 2.851786] Bluetooth: HCI device and connection manager initialized [ 2.852553] Bluetooth: HCI socket layer initialized [ 2.852950] Bluetooth: L2CAP socket layer initialized [ 2.853339] Bluetooth: SCO socket layer initialized [ 2.854780] rtw_8821ce 0000:02:00.0: enabling device (0000 -> 0003) [ 2.860999] rtw_8821ce 0000:02:00.0: firmware: direct-loading firmware rtw88/rtw8821c_fw.bin [ 2.861811] rtw_8821ce 0000:02:00.0: Firmware version 24.11.0, H2C version 12 [ 3.053152] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 3.054990] Console: switching to colour dummy device 80x25 [ 3.055200] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.055263] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 3.056439] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.057149] i915 0000:00:02.0: firmware: failed to load i915/adlp_dmc_ver2_16.bin (-2) [ 3.057158] i915 0000:00:02.0: firmware: failed to load i915/adlp_dmc_ver2_16.bin (-2) [ 3.057161] i915 0000:00:02.0: Direct firmware load for i915/adlp_dmc_ver2_16.bin failed with error -2 [ 3.057165] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/adlp_dmc_ver2_16.bin. Disabling runtime power management. [ 3.057168] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 3.058091] i915 0000:00:02.0: firmware: failed to load i915/tgl_guc_70.bin (-2) [ 3.058102] i915 0000:00:02.0: firmware: failed to load i915/tgl_guc_70.bin (-2) [ 3.058110] i915 0000:00:02.0: firmware: failed to load i915/tgl_guc_70.1.1.bin (-2) [ 3.058116] i915 0000:00:02.0: firmware: failed to load i915/tgl_guc_70.1.1.bin (-2) [ 3.058122] i915 0000:00:02.0: firmware: failed to load i915/tgl_guc_69.0.3.bin (-2) [ 3.058128] i915 0000:00:02.0: firmware: failed to load i915/tgl_guc_69.0.3.bin (-2) [ 3.058131] i915 0000:00:02.0: GuC firmware i915/tgl_guc_70.bin: fetch failed with error -2 [ 3.058134] i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details. [ 3.058137] i915 0000:00:02.0: [drm] GuC firmware(s) can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 3.059258] usbcore: registered new interface driver btusb [ 3.061270] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 [ 3.062263] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 3.062270] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin [ 3.062864] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_fw.bin [ 3.062884] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin [ 3.063007] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8821c_config.bin [ 3.063070] Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926 [ 3.192314] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin version 0.0.0 [ 3.192400] i915 0000:00:02.0: GuC initialization failed -2 [ 3.192404] i915 0000:00:02.0: Enabling uc failed (-5) [ 3.192407] i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged! [ 3.192797] i915 0000:00:02.0: [drm:add_taint_for_CI [i915]] CI tainted:0x9 by intel_gt_init+0xb3/0x2f0 [i915] [ 3.202348] intel_rapl_common: Found RAPL domain package [ 3.202355] intel_rapl_common: Found RAPL domain core [ 3.202358] intel_rapl_common: Found RAPL domain uncore [ 3.422201] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 3.424322] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.425214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 3.425427] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.536244] Bluetooth: hci0: RTL: fw version 0x75b8f098 [ 4.119752] fbcon: i915drmfb (fb0) is primary device [ 4.155328] Console: switching to colour frame buffer device 240x67 [ 4.176507] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 4.235449] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input11 [ 4.235578] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input12 [ 4.235691] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input13 [ 4.237965] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input14 [ 5.059662] Adding 9227496k swap on /dev/sda3. Priority:-2 extents:1 across:9227496k SSFS [ 5.067201] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 5.306995] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. [ 10.325071] wlan0: authenticate with xx:xx:xx:xx:xx:xx [ 10.855094] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3) [ 10.857349] wlan0: authenticated [ 10.859114] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1/3) [ 10.863851] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x511 status=0 aid=70) [ 10.864279] wlan0: associated [ 10.923052] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by xx:xx:xx:xx:xx:xx [ 12.119238] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready